Home Site Map 
 
   
     
 
 GEOPIC: Geodata Processing And Interpretation Center
 
Introduction
Seismic Data Processing
Seismic & Log Data Interpretation
Seismic Software Development
Contact
 
 Introduction

The Geodata Processing and Interpretation Centre (GEOPIC) located at Dehra Dun was established in 1987. It is ONGC's largest computing facility and one of the few centres around the world where integrated processing and interpretation of different geo-scientific data from seismic to petro-physical, geological and reservoir engineering are carried out.

Over 60 per cent of the seismic data acquired by ONGC is processed at GEOPIC, which includes all the 3-D seismic data acquired so far over 69 prospects/fields. About 68 billion bits of data are processed here every day.

These 3-D data are interpreted synergetically to unravel the structural and stratigraphic complexities of the sub-surface in search for hydrocarbons. Over the years, 65 3-D prospects have been interpreted.

Interpretation capabilities of GEOPIC can be assessed from its success rate of 54 per cent for the exploratory locations proposed by the Institute, in contrast to the global average of 25 per cent. These capabilities have fetched processing and interpretation contracts both for Indian and Foreign basins.

GEOPIC is a member of 'Consortium of Research on Elastic Wave Exploration Seismology (CREWES)', University of Calgary, Canada; SRB Project, University of Stanford and International Association of Geophysical Contractors. It is also the coordinating agency for introducing Multi-component technology in ONGC.
 
 Seismic Data Processing

GEOPIC is the largest 2D and 3D seismic data processing centre in India, with a proven capacity for processing over 75,000 line kilometer of seismic data annually.

The explorations goals are achieved by high quality of 3D processing, customized reprocessing tuned to meet interpretation objectives, optimal utilization of resources and special processing and creative techniques.


The services offered are:

High resolution 2D, 3D & 4D seismic data processing

Amplitude variation with offset (AVO)

Seismic inversion

Prestack time and depth migration

Velocity depth modeling

VSP data processing

Seismolithological modeling

Subsurface imaging in geologically complex setting


The facilities available are:

Hardware

     Origin 2000 server; 20 CPU's ; 512 MB/CPU RAM, 1080 GB Hard Disk
     IBM 3083 Jx3 computer system
     Robotic tape library
     11 processing workstations
     4 Inversion/Interpretation workstations
     4 Inversion/Interpretation client nodes
     3 Archival workstations
     60 X-stations 3590, 3490B, 3480 cartridge drives, DLT drive, 9-track round cape drives B&W and
        colour laser printers, scanners, digitizers

Software

     WGC processing software
     Promax processing software
     Time domain processing - FOCUS 2D & 3D
     Inversion - Geodepth products - Power (2D and 3D); Earth model, Geosec (2D and 3D) Probe
     Interpretation - Seisx, Voxelgeo, Geolog and Welltie
     Reservoir modelling - IRAP RMS, IRAP Mapping, STORM and Voxelgeo
     Powerful velocity model building
     Amplitude and AVO inversion


Major jobs completed are:

Volume of data processed:

     2,30,000 LKM of 2D data onland and offshore
     54,000 LKM of 3D data onland and 31,000 LKM of 3D data offshore

Processed data for:

     Sixty nine 3D projects
     Hilly terrain, deserts, offshore, land marine ties and deep waters
     Vietnam offshore for British Petroleum
     Western India onland for Selan Exploration
     Basins in Iraq and Kazakhstan
     Western India offshore for Essar Oil Ltd.

 
 Seismic And Log Data Interpretation


Computer aided interpretation is the mainstay of 3D seismic interpretation as the amount of data used is voluminous. Interactive interpretation techniques on workstations are being used in GEOPIC for all geoscientific data.


The services offered are:

IIWS based interpretation of 2D, 3D data

Structural mapping

Integrating seismic attributes with wireline, core and reservoir data for reservoir characterisation

Seismic modeling

3D visualisation and animation

Palinspastic restoration

AVO analysis

Formulation of geological models for exploration and development

Reservoir characterization


The facilities available are:

Hardware

     SUN workstations
     Silicon graphic workstations
     Micro VAX workstations
     Digitizers
     Scanners
     Colour and B/W plotters

Software

     Landmark software on SUN workstations and Geoquest-Schlumberger software on SUN / Silicon      Graphics workstations for the following interpretative activities:
     Structural interpretation
     Stratigraphic interpretation
     Attribute analysis
     Seismic modeling
     Wireline log evaluation
     Petrophysical interpretation
     Reservoir characterisation
     3D animation and visualisation
     Palinspastic restoration


Major projects completed are:

Projects Interpreted

     Sixty five 3D projects
     Twenty seven 2D projects
     Review of nineteen 3D projects based on drilling results

Interpretation of:

     Vietnam offshore 2D data for British Petroleum
     3D data for Selan Exploration
     2D data from basins of Egypt, Iraq and Kazakhstan
     3D data for limits of carbonate reservoir and average porosity distribution

Generation of depth structure map from time structure map using layer stripping method

Instantaneous frequency attributes to pick up the paleochannel

 
 Seismic Software Development

Options in the programmes of standard processing software are optimized, modified and generated to meet the requirement of processing groups in solving the data dependent problems. New techniques are also inducted both for processing and interpretation.


The services offered are:

The following software packages have been developed and offered for sale/use:

3D Dip and Azimuth Transformation Software (DATS)

Design of shot-receiver layouts for 3D data acquisition through simulation ofcoverage

Post stack 3D cross line statics estimation and application

PC/Workstation based software under UNIX and Windows environment for processing seismic data
    in the field for QC


The facilities available are:

Rolta 6000/300 Workstation

All the other hardware/software available for processing and interpretation are also being used for
    seismic software development
 
 Contact

Geodata Processing and Interpretation Centre (GEOPIC)
Oil and Natural Gas Corporation Limited,
KDMIPE Campus,
9 Kaulagarh Road,
Dehra Dun 248 195,
Uttaranchal, India

Tel.: 91-135-757101-5
Fax: 91-135-750286

Email: geopic@nde.vsnl.net.in
 
 
 
 
© 2008 - 2009 ONGC Limited. All rights reserved.